One day I was using French Green clay to add a colored layer to my husband’s spiced soap and I forgot the essential oils. There wasn’t going to be much “spice” in the soap without the oils so I had to stir in the colored layer in order to incorporate the essential oils. Fast-forward 6 weeks and my husband emerges from his shower and asks, “What did you do differently to the soap. It felt so silky!”
I think something most home soapers can relate to is the desire to experiment. I often find myself thinking, “Hmm, I wonder if I can put that in soap?”
Considering I have quite a collection of healing clays in my pantry, it seemed an obvious choice for experimentation. So instead of using it simply as a natural colorant, I began adding it for it’s other beneficial properties.
Adding Clay to Homemade Soap?
I began by adding clay to my homemade shaving soap. The addition of the clay provides the “slip” that is needed for a smooth shave.
Another favorite of mine is charcoal and clay facial soap. What started as an experimental body soap became one of my favorite facial soaps.
Then I decided that I wanted to have the silky experience my husband had so I added some clay to my own favorite body bar. The result was a lovely soap that had a good lather and also makes my skin feel soft. As an added bonus, it works well for shaving my legs and is also gentle on my face.
Why Clay Soap?
Healing clays are a staple for a healthy lifestyle. I use clay to wash my hair, as a relaxing way to detox my bath water, and I have even taken it internally to help reduce morning sickness.
There are several different healing clays that are wonderful in soap.
- Rhassoul clay is found in the Atlas Mountains of Morocco. It has a silky texture and is nourishing to the skin. It also has a high negative charge which enables it to draw blackheads and impurities from the skin. Because it is high in minerals such as silica, magnesium, and potassium, it is wonderful for hair, skin, and nails. Rhassoul clay changes the color of your soap to beige.
- Bentonite clay is another great clay that can be added to soap. It also has an amazing capacity to absorb toxins from the body making it great for oily and acne-prone skin. It is composed of volcanic ash and is a light gray color but will add an almost greenish tint to your soap.
- French Green clay, as it’s name suggests, is a green color and it will also turn your soap very pale green. The clay gets it’s color from a combination of iron oxide and decomposed plant matter. It has a long history of being used to treat a variety of skin problems and is especially effective on oily skin. French Green clay may be too drying for already dry skin.
- Kaolin clay, also called white cosmetic clay, is very mild and good for use on all skin types. It is gently exfoliating and adds the “slip” to soap that helps to make a nice shaving soap.
- Rose clay is a pink colored kaolin clay and offers the same benefits as white Kaolin clay. It is often chosen for it’s pink color to naturally color soap.
Making Soap With Clay
If you are new to soap making, you will want to familiarize yourself with the process. It is not difficult to make your own soap, but there are some important things you need to understand that will make the whole adventure easier and safer for you.
Clay is very easy to work with and is generally added to a soap recipe at the rate of 2 teaspoons per pound of soaping oils (total weight of oils). The following recipe has 32 oz of oils so I used 4 teaspoons of clay.
The easiest way to add clay to your soap is by mixing it into the warm oils before you add in your lye/water. Once the oils are fully melted, just add the clay and mix with a stick blender until the clay is incorporated. This method evenly disperses the clay throughout the entire batch.
If you are using the clay to color only part of the batch or to create a swirl you will have to add in a few extra steps.
- Follow the soap making instructions below. When you add the lye/water, stir JUST until combined evenly with oils.
- Spoon or pour out the amount you want to color into a separate bowl and add the appropriate amount of clay to one or both bowls.
- The tricky part now is to get both bowls of soap to trace at the same time. Work quickly because if one gets too thick it will be difficult to get the right look when you do your swirl.
- Once they are both ready, you can continue with your preferred method of swirling or layering.
Soap Making Supplies
I have a set of tools I keep just for soap-making. It is not absolutely necessary to keep them separate but it eliminates any possibility of not getting your tools clean enough for food preparation.
- Non-reactive pot or slow-cooker for warming oils
- Heavy plastic pitcher or quart mason jar for mixing lye/water
- Second jar or disposable cup for measuring lye
- Infrared thermometer or 2 candy thermometers
- Digital scale
- Stick blender
- Spoon (non-reactive)
- Safety glasses and rubber gloves
- White vinegar for final cleanup (optional)
Clay Soap Ingredients
This recipe has a 5% superfat and makes 3 lbs of soap. All measurements are by weight.
- 9 oz olive oil
- 9 oz coconut oil
- 9 oz palm oil (sustainably sourced)
- 3 oz castor oil
- 2 oz mango butter
- 4.5 oz lye
- 10.5 oz distilled water
- 4 teaspoons Rhassoul clay
- 1 oz essential oils (optional) Lavender is nice for a gentle soap
Directions for Making Clay Soap
- Prepare your mold. Wood molds will need to be lined with freezer paper or wax paper. Silicone molds are ready to use as is. You can also use any box if you line it with freezer paper, wax paper, or a thick garbage bag.
- Put on your protective gear, place the glass jar on the scale and tare your scale. Pour distilled water into the jar until it reads 10.5 oz. Set aside.
- Put the second jar on the scale and tare the scale. Carefully pour lye into the jar until your scale reads 4.5 oz.
- In a well-ventilated area or outside, slowly pour the lye into the water. Stir the mixture until the lye is dissolved. It will become quite hot so be careful if you need to move it. Let this mixture sit and cool to around 100 degrees.
- While the lye is cooling, measure all other ingredients EXCEPT the essential oils and warm them together in your pot or slow-cooker.
- Once they are melted, remove the oils from the heat and add the clay. Use your stick blender to mix the clay in until it is completely dispersed.
- Let oils cool to around 100 degrees. I use the infrared thermometer about every 5-10 minutes to test the temperature. This works really well but a candy thermometer placed in each container also works. Ideally, you want the lye/water and the oils to both be around 100 degrees and within 10 degrees of each other. If one is cooling faster than the other you can put your oils back on the heat source or the lye/water mixture in a warm water bath to slow the cooling process a bit.
- When the temps match, slowly pour the lye/water into the oils. BEFORE you turn your stick blender on, make sure the blade is completely submerged or you will splash it everywhere. Use the stick blender to bring the batter to a light trace. It should be slightly thick and resemble cake batter.
- Now would be the time to add essential oils, but it is completely optional.
- Blend essential oils in by pulsing the immersion blender a few times. This should bring the mixture to a medium trace. You can tell when you have reached a medium trace by lifting your blender up out of the mixture (in the OFF position) and observing how the drips behave. They should leave a trail or “trace” on the surface. If you don’t use essential oils, just pulse your blender a few more times to bring it to medium trace.
- Pour the soap batter into your prepared mold. Use the spatula to get it all out. Remember that the soap is not fully “cooked” yet at this point and could still irritate your skin so you should still be wearing your gear.
- Put the mold somewhere it can sit undisturbed for 24 hours.
- Place an upside down cardboard box over the soap and cover with a towel. If your house is warm the towel may not be necessary.
- Let sit for 24 hours. You can now remove your soap and cut it. I cut the bars about 1 inch thick which gives you 1o bars weighing approximately 4.8 oz each, but you can cut them whatever size you like.
- Stand bars up in a dry area with an inch or so of space in between to allow for air circulation and let them sit for 4-6 weeks. This will allow the soap to complete the saponification process. The soap will also lose some of its water during this time making the bar harder. The harder the bar, the longer it will last.
Soap Making Clean-up
Rinse the jars and any supplies that had lye or soap batter in them well with running water. I have washed the tools two different ways. You can pour some vinegar in a sink filled with hot soapy water and wash them in there, or you can wash your well rinsed dishes in the dishwasher.
Have you ever used clay soap? Will you try to make it?
Discussion (28 Comments)
Can you substitute the Palm oil for another oil? Or is it specifically needed. I’d like to choose another oil that I have on hand if it’s possible.
Good info! Can the clay be added to liquid or foam soap? I make my own lotion, cleansing oils, shampoo, and foaming hand soap with already made bars or Bonners liquid. But I am so busy that I can’t see myself making bar soap too. So I’m hoping you know of a way to add the clay to foam or liquid soap.
Is clay soap available for purchase anywhere?
I liked your very clear, easy directions. I’ve been a little nervous about making soap, but with these very straight forward directions I’m ready to get started. Thanks!
Does the stick blender also need to be non-reactive?
Do you have any soap for sale
I don’t sell my recipes…
Can I add clay to melt and pour soap?
In the above list of items needed, you mentioned a spatula. Did you possibly mean a rubber scraper or does it really matter?
Clay is very effective to draw out skin impurities. It’s great in a cleaning application.
HA!!!! When I first read the title my dyslexia turned on and I thought it said Clay SOUP!!!!!